апликација
Corrosive, pure and contaminated media in the chemical;
pharmaceutic and petrochemical industries;
In metal processing;
waste water treatment;
When Stainless steel is not sufficiently resistant;
An alternative to expensive haste alloy, titanium alloy pumps;
When anti-adhesive surfaces are important.
Пумпинг течност
Acid and caustic liquid
Oxidizer corrosive liquids
Difficult-to-seal liquids
Сумпорна киселина
Hydroelectric acid
Азотна киселина
Acid and lye
Nitromuriatic acid
Дизајн непропусан за цурење
-Seal-less Teflon lined magnetic drive pump, driven by magnetic coupling indirectly, motor shaft and pump chamber is completely sealed, avoid pump leakage problem and use site pollution.
-Овлажени део материјала је ПТФЕ фузионисан са ФЕП-ом, може пренети ниске и високе концентрације киселине, алкалије, јаки оксидатор итд. корозивну течност.
-Robust pump casing. The wetted part material is fluoroplastic, pump casing material is cast iron, and pump casing can bear part of piping and mechanical impact.
-The structure is tight, safe, and energy-saving.
-Cost-intensive wearing parts are canceled by the seal-less method of construction, which reduces maintenance costs and prolongs long service life.
Кућиште пумпе
. Virgin Fluoroplastic
- Знатно лакша и поузданија контрола квалитета
- Нема смањења отпорности на пермеацију
- Чисти фармацеутски и фини хемијски медији: без контаминације
With ductile cast iron casing absorbs all the hydraulic and pipework-forces
According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required.Flange with service-minded through holes to DIN, ANSI, BS, JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP]
-Систем без метала не индукује вртложне струје и на тај начин избегава непотребно стварање топлоте. Ефикасност и оперативна поузданост имају користи од тога. Чак и ниске брзине протока или медији близу тачке кључања могу се стога преносити без увођења топлоте.
Close Impeller
Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates .Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media.
沪公网安备 31011202007774号