QBK STAINLESS Stol Membran Pompel

peanut butter, pickles, mashed potatoes, small sausage, jam, apple syrup, chocolate, etc.

paints, gums, pigments

latex,adhesives and glue

tile, porcelain and pottery glaze

sands and mud

creams and fillers

Kläranlag

absorb water for tanker, barge warehouse

hops and yeast slurry, syrup, molasses

cement grout and mortar

abrasive, corrosive, oil and mud, grease

toxic, flammable, volatile liquid

acid, alkali, strong corrosive liquids

high temperature liquid maximum resistance to 150 ℃

as a variety of solid-liquid separation equipment pre-delivery pressure device

Produktübersicht

QBY3 pneumatic diaphragm pump is the third generation of pneumatic diaphragm pump developed by our company, with reliable quality and long service life. It has characteristics of transportation machinery pump, submersible pumps, shielding pumps, mud and trash pumps.

Virdeeler

- No irrigation water, suction lift up to 5 meters, lift up to 70 m, the outlet pressure ≧ 7bar;
- Mobile spacious, good performance, allowing the maximum particle diameter of 10 mm . Pumping mud, impurity, minimal wear and tear on the pump;head, flow stepless adjustment can be achieved through the valve opening degree ( pressure adjustment between the 1-7bar);
- The pump with no moving parts, no shaft seals, diaphragm pumps and other pumping medium with moving parts, completely separated from the working medium, the transmission medium does not leak out . So pumping toxic, volatile or corrosive media, will not cause environmental pollution and danger to personal safety;
- Do not have electricity, the use of safe and reliable in flammable and explosive places;
- The work can be immersed in the medium;
- Easy to use, reliable, open to stop simply open and close the gas valve, even for a long time because of accident or sudden stop running no media will not result in damage to the pump, once the overload, the pump will automatically shut down, a self- protective properties, when the load back to normal, and can automatically start running;
- Simple structure, less wearing parts, the pump structure is simple to install, easy maintenance, medium conveyed by the pump does not come into contact with the valve, linkage and other moving parts, unlike other types of pumps due to the rotor, pistons, gears wear performance blades and other parts of leaving the gradual decline;
- Can transport more viscous liquid ( viscosity 10,000 cps or less );
- The lubricating oil pump is not required, if idling, and no effect on the pump, which is a major feature of the pump;
- plastic flange pressure; PN0.6MPa (10bar), metal flange pressure; PN1.0MPa (10bar).