आईएमडी चुंबकीय केन्द्रापसारक पंप

आवेदन

Corrosive, pure and contaminated media in chemical industries,

Pharmaceutic and petrochemical industries,

In metal processing, waste water treatment etc.  

जब स्टेनलेस स्टील पर्याप्त रूप से प्रतिरोधी नहीं होता

An alternative for expensive haste alloy, titanium alloy pumps

जब चिपकने-रोधी सतहें महत्वपूर्ण होती हैं।

पम्पिंग तरल

- Strong corrosive liquids

- Aggressive, explosive and toxic liquids

- Volatile chemicals

- Flammable liquids

- Difficult-to-seal liquids

Economic and Reliable Design Feature

-Sealess design and free leakage
Without shaft seal and driving through by magnetic coupling, which avoid leakage.

-Compact structure
Close-coupled design, magnetic coupling connect to motor shaft end directly, without rolling bearing loss. High efficiency and low noise. Reduce installation space and easily assembly.

-Convenient maintenance
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,

-No magnetic eddy current heating
Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP],With high-strength mechanical property, free from the magnetic eddy current phenomenon.Inspection and maintenance work.


पंप आवास

. वर्जिन फ्लोरोप्लास्टिक  
- काफी आसान और अधिक विश्वसनीय गुणवत्ता नियंत्रण
- No reduction in the permeation resistance.
- शुद्ध दवा और ठीक रासायनिक मीडिया: कोई संदूषण नहीं
. With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.

कार्बन-फाइबर-प्रबलित प्लास्टिक से बना स्पेसर स्लीव [सीएफआरपी]

-धातु-मुक्त प्रणाली किसी भी भंवर धाराओं को प्रेरित नहीं करती है और इस प्रकार अनावश्यक गर्मी उत्पादन से बचती है। इससे दक्षता और परिचालन विश्वसनीयता को लाभ मिलता है। यहां तक ​​कि कम प्रवाह दर या उनके क्वथनांक के पास के मीडिया को भी गर्मी के बिना पहुंचाया जा सकता है।

Closed Impeller
 
-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media

असर
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-dimensional stability. SSIC is extremely resistant to corrosion and abrasion

मॉडल पहचान