This pump is used for corrosive, pure and contaminated media in the chemical, pharmaceutic and petrochemical industries, in metal processing, waste water treatment etc.
. When stainless steel is not sufficiently resistant
. Alternatively to expensive haste alloy, titanium alloy pumps
. When anti-adhesive surfaces are important.
आवेदन
रासायनिक और पेट्रोकेमिकल उद्योग
अम्ल एवं लाइज़
Metal Pickling
दुर्लभ-पृथ्वी पृथक्करण
कृषि रसायन
Nonferrous smelting process
रंगों
फार्मास्युटिकल
पल्प पेपर
इलेक्ट्रोप्लेटिंग उद्योग
Radio Industry
पम्पिंग तरल
अम्ल और कास्टिक तरल
ऑक्सीडाइज़र संक्षारक तरल पदार्थ
सील करने में कठिन तरल पदार्थ
सल्फ्यूरिक एसिड
हाइड्रोइलेक्ट्रिक एसिड
नाइट्रिक एसिड
अम्ल और लाइ
नाइट्रोम्यूरिएटिक एसिड
लीक-प्रूफ डिज़ाइन.
Seal-less Teflon lined magnetic drive pump, driven by magnetic coupling indirectly. The motor shaft and pump chamber are completely sealed, which avoids pump leakage problem and pollution.
Virgin Fluoroplastic
- Considerably easier and more reliable quality control;
- No reduction in the permeation resistance;
- Pure pharmaceutical and fine chemical media: no contamination.
With ductile cast iron casing absorbs all the hydraulic and pipework-forces.
According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
The metal-free system does not induce any eddy currents and thus avoids unnecessary heat generation. Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP] Efficiency and operational reliability benefit from this. Even low flow rates or media near their boiling point can therefore be conveyed without the introduction of heat.
प्ररित करनेवाला बंद करें
Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media.