CQB65-50-150F Pumpa dràibhidh magnetach air a lìnigeadh le Teflon

This pump is used for corrosive, pure and contaminated media in the chemical, pharmaceutic and petrochemical industries, in metal processing, waste water treatment etc.  
. When stainless steel is not sufficiently resistant
. Alternatively to expensive haste alloy, titanium alloy pumps
. Nuair a tha uachdar anti-adhesive cudromach.

iarrtas
Gnìomhachasan ceimigeach agus peitriceimiceach
Acids & lyes
Metal Pickling
Dealachadh tearc-talmhainn
Ceimigean àiteachais
Pròiseas leaghaidh neo-iarannach
Dathan
Cungaidhean-leigheis
Pulp & Pàipear
Gnìomhachas electroplating
Radio Industry

Pumpadh Liquid

Acid agus leaghan caustic

Ocsaidean corrosive liquids

Leòchan duilich a ròn

Aigéad sulfuric

Acid dealan-uisge

Aigéad nitrigin

Acid agus lye

Aigéad nitromuriatic

Dealbhadh dìon-aodion.

Seal-less Teflon lined magnetic drive pump, driven by magnetic coupling indirectly. The motor shaft and pump chamber are completely sealed, which avoids pump leakage problem and pollution.

Virgin Fluoroplastic  
- Considerably easier and more reliable quality control;
- No reduction in the permeation resistance;
- Pure pharmaceutical and fine chemical media: no contamination.

With ductile cast iron casing absorbs all the hydraulic and pipework-forces.
According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.

The metal-free system does not induce any eddy currents and thus avoids unnecessary heat generation. Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP] Efficiency and operational reliability benefit from this. Even low flow rates or media near their boiling point can therefore be conveyed without the introduction of heat.

Dùin Impeller
Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media.

Aithneachadh modail

Modail agus crìochan  
      Bruthadh dealbhaidh: 1.6MPa