Aansoek
Corrosive, pure and contaminated media in the chemical, pharmaceutics and petrochemical industries, in metal processing, waste water treatment;
. When stainless steel is not sufficiently resistant;
. An alternative to expensive haste alloy, titanium alloy pumps;
. Wanneer anti-kleef oppervlaktes belangrik is.
Pomp vloeistof
1. Acid and caustic liquid
2. Oxidizer corrosive liquids
3. Difficult-to-seal liquids
4. Swaelsuur
5. Hydroelectric acid
6. Nitric acid
7. Acid and lye
8. Nitromuriatic acid

Lekvaste ontwerp.
Seal-less Teflon lined magnetic drive pump, driven by magnetic coupling indirectly. The motor shaft and pump chamber is completely sealed, which avoids pump leakage problem and use site pollution.
- Maintenance convenient and long service life. Cost-intensive wearing parts are canceled by the seal-less method of construction, which reduces maintenance costs and prolongs service life.
. Virgin Fluorplastic
- Aansienlik makliker en meer betroubare gehaltebeheer
- Geen vermindering in die deurdringingsweerstand nie.
- Suiwer farmaseutiese en fyn chemiese media: geen besoedeling nie
With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.
The metal-free system does not induce any eddy currents and thus avoids unnecessary heat generation. Spacer sleeve is made of Carbon-fiber-reinforced plastic [CFRP], efficiency and operational reliability benefit from this. Even low flow rates or media near their boiling point can be conveyed without the introduction of heat.
Maak waaier toe
-Geslote stuwer met vloei-geoptimaliseerde vaankanale: vir hoë doeltreffendheid en lae NPSH-waardes. Die metaalkern word beskerm deur 'n dikwandige naatlose plastiekvoering, die groot metaalkern en verhoog die meganiese sterkte aansienlik selfs by verhoogde temperatuur en hoë vloeitempo's. Versekerde skroefverbinding aan die as teen losmaak as die pomp in die verkeerde rotasierigting aangeskakel word of in die geval van terugvloeiende media.