DCZ tipe petrochemiese proses pomp

It can be widely used to transport inorganic acids and organic acids such as sulfuric acid, nitric acid, hydrochloric acid and phosphoric acid at various temperatures and concentrations. Alkaline solutions such as sodium hydroxide and sodium carbonate at various temperatures and concentrations. Various salt solutions and various liquid petrochemicals, organic compounds, and other corrosive materials and products are included .

Hoë doeltreffendheid en energiebesparing: good hydraulic performance, high pump efficiency and wide range. By changing the size of the impeller, it can meet different performance requirements.

Sterk veelsydigheid: The whole series has good versatility, high degree of serialization, convenient unified management and reduced spare parts inventory.

Betroubare werking: Increase the pump shaft, eliminate the bushing, reduce the sealing surface, and reduce the failure rate.

Veiligheid en omgewingsbeskerming: Increase the bearing housing, avoid oil lubrication, reduce leakage points, and is conducive to on-site environmental sanitation.

A variety of seals: Can be matched with single seal, double seal, packing seal and K-type seal.

Gerieflike instandhouding: The Cartridge structure single seal and double seal，the pump can be accurately installed in place without installation and replacement professional personnel.

Kaliber: 32-300mm;

Vloeitempo: ≤2000m3/h;

hoof: ≤160m;

Werksdruk: 2.5MPa;

Werk temperatuur: - 80 ℃~+300℃;

Flat characteristic curve, low cavitation value and high efficiencyThese characteristics are also maintained when the load is not full.