IMD Magnetic Centrifugal Pump, China IMD Magnetic Centrifugal Pump Manufacturers, Suppliers, Factory

Application

Corrosive, pure and contaminated media in chemical industries,

Pharmaceutic and petrochemical industries,

In metal processing, waste water treatment etc.

When Stainless steel is not sufficiently resistant

An alternative for expensive haste alloy, titanium alloy pumps

When anti-adhesive surfaces are important.

Pumping Liquid

- Strong corrosive liquids

- Aggressive, explosive and toxic liquids

- Volatile chemicals

- Flammable liquids

- Difficult-to-seal liquids

Economic and Reliable Design Feature

-Sealess design and free leakage
Without shaft seal and driving through by magnetic coupling, which avoid leakage.

-Compact structure
Close-coupled design, magnetic coupling connect to motor shaft end directly, without rolling bearing loss. High efficiency and low noise. Reduce installation space and easily assembly.

-Convenient maintenance
Pull-back construction, which allows easy on-site maintenance, no need to dis-assembly pipes,

-No magnetic eddy current heating
Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP],With high-strength mechanical property, free from the magnetic eddy current phenomenon.Inspection and maintenance work.

The Pump Housing

. Virgin Fluoroplastic
- Considerably easier and more reliable quality control
- No reduction in the permeation resistance.
- Pure pharmaceutical and fine chemical media: no contamination
. With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.

Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP]

-The metal-free system does not induce any eddy currents and thus avoids unnecessary heat generation. Efficiency and operational reliability benefit from this. Even low flow rates or media near their boiling point can therefore be conveyed without the introduction of heat.

Closed Impeller

-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media

Bearing
-Pure SSIC bearing make a decisive contribution to operational reliability and the long service life of the pump. pure SSIC as a base material produces maximum
-dimensional stability. SSIC is extremely resistant to corrosion and abrasion

Model Identification

S/N	Model	L	S	P	f	W	T	H	h	a	b	e	g	i	j	n- Øt	n-Ød	n- Øq
1	IMD40-25-130FA	610	250	70	80	210	160	310	150	Ø150	Ø110	20	Ø115	Ø85	18	4-M16	4-M12	4- Ø15
2	IMD40-25-140FA	610	250	70	80	210	160	310	150	Ø150	Ø110	20	Ø115	Ø85	18	4-M16	4-M12	4- Ø15
3	IMD40-25-150FA	610	250	70	80	210	160	310	150	Ø150	Ø110	20	Ø115	Ø85	18	4-M16	4-M12	4- Ø15
4	IMD40-25-160FA	610	250	70	80	210	160	310	150	Ø150	Ø110	20	Ø115	Ø85	18	4-M16	4-M12	4- Ø15
5	IMD40-25-165FA	610	250	70	80	210	160	310	150	Ø150	Ø110	20	Ø115	Ø85	18	4-M16	4-M12	4- Ø15
6	IMD40-25-170FA	610	250	70	80	210	160	310	150	Ø150	Ø110	20	Ø115	Ø85	18	4-M16	4-M12	4- Ø15
7	IMD40-25-185F	610	250	70	80	210	160	310	150	Ø150	Ø110	20	Ø115	Ø85	18	4-M16	4-M12	4- Ø15
8	IMD40-25-230F	730	336	70	100	275	212	370	180	Ø150	Ø110	20	Ø115	Ø85	18	4-M16	4-M12	4- Ø15
9	IMD50-40-140F	730	330	70	80	265	212	360	180	Ø165	Ø125	20	Ø150	Ø110	20	4-M16	4-M16	4- Ø15
10	IMD50-40-150F	730	330	70	80	265	212	360	180	Ø165	Ø125	20	Ø150	Ø110	20	4-M16	4-M16	4- Ø15
11	IMD50-40-160F	730	330	70	80	265	212	360	180	Ø165	Ø125	20	Ø150	Ø110	20	4-M16	4-M16	4- Ø15
12	IMD50-40-165F	730	330	70	80	265	212	360	180	Ø165	Ø125	20	Ø150	Ø110	20	4-M16	4-M16	4- Ø15
13	IMD50-32-195F	730	330	70	80	265	212	360	180	Ø165	Ø125	22	Ø150	Ø110	20	4-M16	4-M16	4- Ø15
14	IMD50-32-200F	730	330	70	80	265	212	360	180	Ø165	Ø125	22	Ø150	Ø110	20	4-M16	4-M16	4- Ø15
15	IMD65-50-120F	725	318	95	80	265	212	360	180	Ø185	Ø145	20	Ø165	Ø125	20	4-M16	4- Ø18	4- Ø15
16	IMD65-50-130F	725	318	95	80	265	212	360	180	Ø185	Ø145	20	Ø165	Ø125	20	4-M16	4- Ø18	4- Ø15
17	IMD65-50-165F	730	318	95	80	265	212	365	180	Ø185	Ø145	24	Ø165	Ø125	24	4-M16	4-M16	4- Ø15
18	IMD65-40-200F	928	410	70	100	290	220	430	230	Ø185	Ø145	22	Ø150	Ø110	22	4- Ø18	4-M16	4- Ø15
19	IMD80-65-120F	935	416	70	100	290	220	430	230	Ø200	Ø160	22	Ø185	Ø145	22	4- Ø18	4-M16	4- Ø15
20	IMD80-65-140F	935	416	70	100	290	220	430	230	Ø200	Ø160	22	Ø185	Ø145	22	4- Ø18	4-M16	4- Ø15
21	IMD80-50-200F	970	398	70	100	320	240	445	230	Ø200	Ø160	22	Ø165	Ø125	22	8- Ø18	4-M16	4- Ø15
22	IMD100-80-160F	1110	485	95	125	345	280	500	250	Ø220	Ø180	24	Ø200	Ø160	24	8- Ø18	8-M16	4- Ø15
23	IMD100-80-180F	1110	485	95	125	345	280	500	250	Ø220	Ø180	24	Ø200	Ø160	24	8- Ø18	8-M16	4- Ø15
24	IMD125-100-160F	1110	490	95	125	345	280	500	250	Ø250	Ø210	24	Ø225	Ø180	24	8- Ø18	8-M16	4- Ø15
25	IMD125-100-200F	1110	490	95	125	345	280	500	250	Ø250	Ø210	24	Ø225	Ø180	24	8- Ø18	8-M16	4- Ø1

tem	Model	Flow	Pump head	Efficiency	NPSHa	Inlet*outlet	Speed	KW	Cross weight
		(m3/h)	(m)	%	(m)	mm	(rpm)		(kg)
1	IMD40-25-130FA	4	21	25	3	40*25	2900	3	85
		*6	20	32
		8	18	33
2	IMD40-25-140FA	4	27	25	3	40*25	2900	3	85
		*6	26	32
		8	24	33
3	IMD40-25-150FA	4	31	25	3	40*25	2900	3	85
		*6	30	32
		8	28	33
4	IMD40-25-160FA	4	35	25	3	40*25	2900	3	85
		*6	34	31
		8	32	32
5	IMD40-25-165FA	4	37	25	3	40*25	2900	3	85
		*6	36	29
		8	34	30
6	IMD40-25-170FA	4	40	25	3	40*25	2900	4	90
		*6	39	28
		8	36	29
7	IMD40-25-185F	0.7	39	25	3	40*25	2900	3	85
		*1	39	28
		2	38	28
8	IMD40-25-230F	4	62	15	3	40*25	2900	7.5	170
		*6	60	20
		10	57	32
9	IMD50-40-140F	8	28	27	3.5	50*40	2900	5.5	140
		*15	26	40
		20	23	41
10	IMD50-40-150F	8	32	25	3.5	50*40	2900	5.5	140
		*15	30	38
		20	27	39
11	IMD50-40-160F	8	37	23	3.5	50*40	2900	5.5	140
		*15	36	36
		20	33	39
12	IMD50-40-165F	8	40	28	3.5	50*40	2900	5.5	140
		*15	39	40
		20	36	43
13	IMD50-32-200F	7	52	20	3.5	50*32	2900	7.5	170 including base plate
		*12.5	50	31
		15	47	28
14	IMD50-32-195F	5	51	25	3.5	50*32	2900	7.5	170,including base plate
		*7	50	28
		10	48	33
15	IMD65-50-120	20	21	40	4	65*50	2900	5.5	135
		*30	15	50
		35	12	50
16	IMD65-50-130F	20	20	45	4	65*50	2900	5.5	135
		*30	19	55
		35	17	56
17	IMD65-50-165F	20	35	40	4	65*50	2900	7.5	145
		*30	33	54
		35	30	52
18	IMD65-40-200F	15	52	25	4	65*50	2900	11	300
		*25	50	37
		35	45	42
19	IMD80-65-120F	35	19	35	4	80*65	2900	11	300 including base plate
		*60	17	51
		70	13	48
20	IMD80-65-140F	35	28	35	4	80*65	2900	11	300 including base plate
		*60	25	46
		70	22	46
21	IMD80-50-200F	35	52	50	4	80*50	2900	18.5	335 including base plate
		*50	50	55
		60	45	56
22	IMD100-80-125F	70	22	60	4.5	100*80	2900	15	330 including base plate
		100	20	65
		120	17	64
22	IMD100-80-160F	60	34	50	5	100*80	2900	30	435including base plate
		*100	32	60
		120	27	62
23	IMD100-80-180F	60	42	50	5	100*80	2900	30	435 including base plate
		*100	40	60
		120	35	62
24	IMD125-100-160F	80	22	50	6	125*100	2900	30	660 including base plate
		120	20	56
		140	15	56
25	IMD125-100-200F	100	40	50	6	125*100	2900	37	680 including base plate
		120	37	56
		160	32	56

Item	Designation	Material
1	Housing seal ring	PTFE
2	Impeller	FEP fused with PTFE
3	Pump housing mouth ring	Silicon carbide
4	Impeller cap	PTFE
5	Pump shaft	Silicon carbide
6	Can seal ring	Fluorubber
7	Housing	Cast iron HT200 lined with FEP
8	Pump cover	Cast iron HT200 lined with FEP
9	Bearing	PTFE
10	Rotor assembly	FEP,NdFeB
11	Can assembly	FEP,Carbon-fiber-reinforced plastic
12	Drive magnet assembly	Cast iron HT200, magnet(NdFeB)
13	Bracket	Cast iron HT200
14	Baseplate	Cast iron HT200

Number	Model	Exterior and installation dimension
Number	Model	L	S	P	B	f	W	T	H	a	b	e	r	g	I	j	n-Øt	n-Ød	n- Øq
1	IMD40-25-230F	745	530	36	710	90	340	310	425	Ø150	Ø110	20	25	Ø115	Ø85	18	4-M16	4-M12	4-Ø20
2	IMD50-32-195F	745	530	36	710	90	340	310	425	Ø165	Ø125	22	25	Ø140	Ø100	20	4-M16	4-M16	4-Ø20
3	IMD50-32-200F	745	530	36	710	90	340	310	425	Ø165	Ø125	22	25	Ø140	Ø100	20	4-M16	4-M16	4-Ø20
4	IMD65-40-200F	1000	740	5	950	100	490	440	510	Ø185	Ø145	22	40	Ø150	Ø110	22	4-Ø18	4-M16	4-Ø20
5	IMD80-65-120F	1000	740	5	950	100	490	440	510	Ø200	Ø160	22	40	Ø185	Ø145	22	4-Ø18	4-M16	4-Ø20
6	IMD80-65-140F	1000	740	5	950	100	490	440	510	Ø200	Ø160	22	40	Ø185	Ø145	22	4-Ø18	4-M16	4-Ø20
7	IMD80-50-200F	1000	740	5	950	100	490	440	525	Ø200	Ø160	22	40	Ø165	Ø125	22	8-Ø16	4-M16	4-Ø20
8	IMD100-80-160F	1170	870	30	1090	90	525	475	595	Ø220	Ø180	24	50	Ø200	Ø160	24	8-Ø16	8-M16	4-Ø25
9	IMD100-80-180F	1170	870	30	1090	90	525	475	595	Ø220	Ø180	24	50	Ø200	Ø160	24	8-Ø16	8-M16	4-Ø25
10	IMD125-100-160F	1170	870	30	1090	90	525	475	595	Ø250	Ø210	24	50	Ø225	Ø180	24	8-Ø16	8-M16	4-Ø25
11	IMD125-100-200F	1170	870	30	1090	90	525	475	595	Ø250	Ø210	24	50	Ø225	Ø180	24	8-Ø16	8-M16	4-Ø25

IMD Magnetic Centrifugal Pump

Products List

Contact Us

Hot categories

About us

Pumps

Valves

Global market