DCZ type petrochemical process pump

It can be widely used to transport inorganic acids and organic acids such as sulfuric acid, nitric acid, hydrochloric acid and phosphoric acid at various temperatures and concentrations. Alkaline solutions such as sodium hydroxide and sodium carbonate at various temperatures and concentrations. Various salt solutions and various liquid petrochemicals, organic compounds, and other corrosive materials and products are included .

High efficiency and energy saving: good hydraulic performance, high pump efficiency and wide range. By changing the size of the impeller, it can meet different performance requirements.

Strong versatility: The whole series has good versatility, high degree of serialization, convenient unified management and reduced spare parts inventory.

Reliable operation: Increase the pump shaft, eliminate the bushing, reduce the sealing surface, and reduce the failure rate.

Safety and environmental protection: Increase the bearing housing, avoid oil lubrication, reduce leakage points, and is conducive to on-site environmental sanitation.

A variety of seals: Can be matched with single seal, double seal, packing seal and K-type seal.

Convenient maintenance: The Cartridge structure single seal and double seal，the pump can be accurately installed in place without installation and replacement professional personnel.

Caliber: 32-300mm;

Flow rate: ≤2000m3/h;

Head: ≤160m;

Working pressure: 2.5MPa;

Working temperature: - 80 ℃~+300℃;

Flat characteristic curve, low cavitation value and high efficiencyThese characteristics are also maintained when the load is not full.